Compressor with Flywheel (PT03A)
Compressor with Flywheel (PT03A)
PT03A
Couldn't load pickup availability
- This Compressor With Flywheel Fits The Following Air Compressors
- C5160V1
- TT318E-
- DV P5125H1
- TT90G
- 9G30TRKE-H
- 9G30TRKE-H-S
- C5160V1-CR
- C5160V1-XF
- C5180V1
- IHD5160V1-MBT
- KC-5160V1
- MAC5001
- MAC8000G
- P5125H1
- P90GE25H1
- TT518E
- TT90G
- TT90GE
- VAN050758
- VAN050761
- XLP-9077GB
- XLP-C6051V1B
- XLP-P2551H1B
| Item | Description | Part Number | Quantity |
| 1 | Intake Filter Assembly | 51111-5600 | 3 |
| 2 | Cylinder Head | 52122-0101 | 3 |
| 3 | Lift Limiter - Discharge Valve Reed | 51121-3102 | 6 |
| 4 | Valve Plate | 52122-2101 | 3 |
| 5 | Valve Plate to Head Gasket | 52122-2105 | 3 |
| 6 | Discharge Valve Reed | 51121-2103 | 6 |
| 7 | Intake Valve Reed | 52122-2103 | 3 |
| 8 | Valve Plate to Cylinder Gasket | 52122-2104 | 3 |
| 9 | Piston | 51122-5101 | 3 |
| 10 | Piston Pin | 51122-5112 | 3 |
| 11 | Piston Pin Snap Ring | 51122-5107 | |
| 12 | Connecting Rod c/w Dipper | 51122-5120 | 3 |
| 13 | Connecting Rod without Dipper | 52122-5120 | |
| 14 | Cylinder | 52122-4101 | 3 |
| 15 | Oil Filter Cap | 51111-4719 | 1 |
| 16 | Cylinder to Crankcase Gasket | 51122-4103 | 3 |
| 17 | Oil Sight Glass c/w Gasket | 51111-4770 | 1 |
| 18 | Crankcase | 51132-4701 | 1 |
| 19 | Crankshaft | 51132-4601 | 1 |
| 20 | Front Bearing |
83501-6205 |
1 |
| 21 | Rear Bearing |
83501-6205 |
1 |
| 22 | Crankcase to Rear Bearing Housing Gasket | 51122-4704 | 1 |
| 23 | Rear Bearing Housing | 51122-4703 | 1 |
| 24 | Oil Seal | 51122-4708 | 1 |
| 25 | Crankcase Breather | 51111-4761 | 1 |
| 26 | Flywheel | 51132-6601 | 1 |
| 27 | Front Bearing Housing | 51122-4706 | 1 |
| 28 | Crankcase to Front Bearing Housing Gasket | 51122-4707 | 1 |
| 29 | Connecting (Interstage) Tubing | 51132-7710 | 2 |
| 30 | Metal Triangle For Valve Plate Assembly (Not Shown) | 51121-3101 | 2 |
| 1/4" Street Elbow (Oil Drain) | STREL1/4 | 1 | |
| Interstage "Y" Fitting | 51121-7702 | 2 | |
| Interstage "Elbow" Fitting | 51112-7701 | 1 | |
| Eagle Oil (650ML or 22OZ) | EAOIL10 | 1 |
| Item | Description | Part Number | Quantity |
| A | Intake Filter Element Kit Includes: | 51121-5614C | 1 |
| - 3 Intake Filter Elements | |||
| B | Valve Repair Kit Includes: |
101000-165 |
3 |
| Valve Seat to Head Gasket (Item 5) | |||
| 2x Outlet Valve Plates (Item 6) | |||
| Intake Valve Plate (Item 7) | |||
| 6x Valve Plate Screws | |||
| Valve Seat to Cylinder Gasket (Item 8) | |||
| Metal Triangle for Valve Plate Assy (Item 30) | |||
| C | Ring Repair Kit Includes: | 101000-265 | 2 |
| Valve Seat to Head Gasket (Item 5) | |||
| Valve Seat to Cylinder Gasket (Item 8) | |||
| 2x Compression Rings | |||
| 1x Oil Control Ring | |||
| Cylinder to Crankcase Gasket (Item 16) | |||
| D | Valve Plate Assembly (Not Shown) | 51121-2100 | 3 |
| E | Flywheel Fastener Kit | 51132-6602 | 1 |
| E | Head Unloader Kit Includes: | ||
| Unloader | 52122-0120 | 3 | |
| Unloading Elbow | 69926-050101 | 1 | |
| Unloading Tee | 69927-050101 | 1 | |
| Unloading Tube | TU-1/4-CU | 5ft | |
| Cylinder Head | 51121-0101U | 3 |
• Eagle Bare PT03A Bare Replacement Compressor Pump.
• Single Stage Pump Requires 5 Horsepower ELECTRIC Motor or 11 Horsepower GASOLINE Engine to Deliver 18.5 CFM at 100 psi
• Fits Eagle Compressors C5160V1, C5360V1 and C5560V1. Also Replaces Ciasons S-302W
• Three Cylinder Single Stage Pump Delivers a Maximum of 18.5 Cubic Feet per Minute at 100 psi, Maximum Pressure Range for This Pump is 135 PSI.
• Designed for 1030 to 1150 RPM (1030 rpm produces 18.5 cfm)
• This Pump Is Designed As A Service Part Replacement For Some Ciasons Compressors But Would Be A Good Pump For Your Special Project Or To Repair A Worn Out Compressor.
• 18 inches wide, 14 inches deep
• 13 1/2 Inches Tall Measuring From Mounting Base To Top.
• 10 5/8" Diameter Flywheel
• Flywheel Hangs (protrudes) Below Base by Approximately 2 Inches.
• Four Mounting Holes, Center To Center Width 8 5/8 Inches, Depth, 6 Inches.
• Your Base Will Require Drilling, Some Cutting And Modification For This Pump To Fit. You May Need To Change Pulley Size On Your Engine Or Motor To Reach The Correct RPM.
• 62# 24X16X17
